Product Overview
This preventative kit contains the following components:
| QUANTITY | P/N | DESCRIPTION | OEM P/N |
| 2 | 10-0700-060006 | Bypass O-Ring | 00114 |
| 11 | 10-0700-060001 | O-Ring, Balance Blocks/Check Valve | 00138 |
| 1 | 10-0700-060012 | O2 Inlet O-Ring | 00143 |
| 1 | 10-0700-060003 | Front Valve Seat O-Ring | 00348 |
| 2 | 10-0700-060008 | Alarm Cap O-Ring | 01943 |
| 1 | 10-0700-060005 | Front Valve Stem O-Ring | 00306 |
| 4 | 10-0700-060004 | Inlet/Outlet Connector O-Rings | 03806 |
| 2 | 10-0700-060009 | Alarm Sleeve O-Ring | 04639 |
| 10 | 10-0700-060010 | O-Ring, Connectors & Caps | 05186/00193/31030 |
| 1 | 10-0700-060011 | Rear Seat O-Ring | 07849 |
| 1 | 10-0700-060007 | Front Seat O-Ring | 05279 |
| 3 | 10-0700-060002 | O-ring Alarm Sleeve & Block Cap | 05307 |
| 2 | 10-0700-060014 | Duck Bill Check Valve | 03895 |
| 4 | 10-0700-080003 | Diaphragm Block Ball Bearing (3/16") | 00770 |
| 1 | 10-0700-060013 | Check Ball (7/32") | 04899 |
| 1 | 10-0700-030006 | Control Knob Spring | 05163B |
| 1 | 10-0700-080002 | Star Washer | 03314 |
| 2 | 10-0700-080006 | Inlet Cone Filter | 06804 |
| 2 | 10-0700-080007 | Balance Block Diaphragm | 03858A |
| 1 | 10-0700-080005 | Foam Diffuser | 03903 |
| 2 | 10-0700-040007 | Step Washer | 03897 |
| 1 | 10-0700-080004 | Muffler Bleed | 03319 |
| 1 | 10-0700-130006 | Caution/Warning Label | 80035 |
* Refer to the blender service manual for the correct procedure for replacing the above components.
Service Manual found HERE
